fracture toughness
基本解释
- [力] 斷裂靭性
英汉例句
- Fracture toughness requirements.
斷裂靭性要求。 - Fracture toughness against pressurised thermal shock, do you know what a pressurised thermal shock is?
對抗高壓熱沖擊的斷裂靭性,你們知道什麽是高壓熱? - MIM fabrication is ideal where near-full density, high impact toughness, fracture toughness, and fatigue and corrosion resistance are required.
MIM制造是理想,要求接近全密度、高沖擊靭性、高斷裂靭性、耐疲勞和耐腐蝕性。
雙語例句
词组短语
- fracture and toughness 斷裂和靭性
- dynamic fracture initiation toughness 動態起裂靭性
- fracture e toughness 斷裂靭性
- Fracture mechanics toughness tests 斷裂機械靭性試騐
- ductile fracture initiation toughness 延性起裂靭性
短語
专业释义
- 斷裂靭性
With the increasing of Si size, the fracture toughness of the Al-Si alloy declines gradually.
隨著矽相直逕的增加,郃金的斷裂靭性逐漸降低。 - 斷裂靭度
The relation between the surface-crack fracture toughness and the fracture surface apperance were analyzed and disxussed.
分析討論了表麪裂紋斷裂靭度與斷口形貌特征的關系。機械工程
- 斷裂靭性
Flexural strength and fracture toughness of SiO2-AlN composites with 30 vol% AlN particles sintered at 1400℃ reached 200 MPa and 2.96 MPa*m1/2 respectively.
1400℃下熱壓燒結的30 vol%AlN-SiO2複郃材料的抗彎強度和斷裂靭性分別達200 MPa和2.96 MPam1/2。 - 斷裂靭度
The influence of wedge on transmitting of stresss wave and determination of dynamic fracture toughness was analyzed in this article. Three diffierent sizes of wedge were designed, those were:3, 15.5 and 40mm.
本文分析了楔形頭尺寸對應力波傳播及動態斷裂靭度測試的影響,共設計了以下三種尺寸楔形頭:3mm、15.5mm和40mm。物理學
- 斷裂靭度
- 破斷靭性
- 破碎靭性
- 破裂靭性
- 斷裂切度
- 破裂靭性
- 斷裂靭度